DL SL-1300AH 微电脑卧式双中分轴铝箔高速分切机
用途
该机被广泛应用于PO、PET、铝塑复合等各种卷状材料的分条、切边、复卷等。
主要技术特点
该机采用PLC、人机、矢量变频器(伺服驱动器),自动纠编器、传感器、配合台湾东菱变频专用电机、日本安川伺服电机、空油压变换系统、风冷式磁粉制动器,来控制分切过程收、放卷的速度与自动张力。到米自动减速停机、收放卷,卷径自动演算,放卷到小卷径自动减速停机、直径公差控制在±1㎜以内。收卷方式采用中心表面卷取、亦可单轴、双轴复卷,收卷轴可用互片式气账轴或机械轴、分切采用上、下圆盘刀,分切宽度由铝垫片任意调节。该系统采用可靠性电器元件、线路简单便于维护、自动化程度高,操作简便。
上料方式(可选择):1.收卷轴旋转方式 2.有轴油压自动方式 3. 无轴油压自动顶锥夹紧方式
主要技术参数 | |
机器速度 | 10-300m/min |
放卷宽度 | 1300mm (200mm-1300mm) |
管芯内径 | 3〞 6〞(选配) |
放卷直径 | 800mm以内 |
收卷直径 | 800mm以内 |
分切材料宽度 | 50mm-1300mm(可调) |
材料材料厚度 | 0.006-0.2mm(材料材质、厚度不同,适用设备及刀具有所区别) |
分切刀具 | 剃刀及上、下圆盘刀 |
注:以上技术参数可根据客户需求定制。
DL SL-1300AH MICROCOMPUTER HORIZONTAL DOUBLE SHAFT FOIL SLITTING MACHINE
ØUsage:
The machine is widely used by PO、PET、Aluminum-plastic composite roll slitting, rewinding, cutting edge all material etc.
ØPerformance and Features:
The machine adopts the PLC control system, vector frequency converter, automatic correcting device, sensor, With Taiwan DOLIN frequency converter motor, Japan YASKAWA vector inverter and hydraulic conversion system, air cooled magnetic powder brake to control collection and release rate and automatic tension in the cutting process. When arrive the distance it will deceleration and adopted for the rolling and up. Volume diameter automatic calculation put the Roll to the small winding the machine will automatic deceleration and diameter precision within plus or minus 1mm. The way to receive the volume is taken from the central surface, and can also be a single axis and double axis complex. That scroll available tilde flatulence axis or mechanical axis, cutting the upper and the lower circular knife, slitting width regulation by the aluminum spacer arbitrary. By using high quality electrical components, simple circuit, well automatic, convenient for maintenance and simple for operation.
ØMaterial Installation (optional): 1. Unwinding shaft rotate mode
2. Hydraulic shaft automatic mode
3.Hydraulic clamping without shaft automatic mode
Main Function Parameters | |
Machine speed | 10-300m/min |
Machine roil surface width | 1300(200mm-1300mm) |
Core inside diameter | 3〞6〞 (optional) |
Max. unwind diameter | Within 800mm |
Max. rewind diameter | Within 800mm |
Stripping width | 5mm-1300mm(adjustable) |
Stripping thickness | 0.006-0.2mm(Material, thickness, applicable equipment and tools to be different) |
Stripping tool | Razor or round blades(opeional) |
Note: The above technical parameters can be customized according to customer demand